PDA

View Full Version : Technical parameters for Triac-Fanuc



Buckis
26-03-2022, 04:21 PM
Hello, looking to buy one of machines so at this moment searching for some info/pictures etc.
online i seen pictures z axis has linear rails, does this some kind retrofit or its original and all axis will be with rails and balscrews?

thanks

m_c
26-03-2022, 09:04 PM
Original Triacs were all dovetail ways with ballscrews.

You should be able to find more details over on the Denford forum ( https://www.denfordata.com/bb/ )

Buckis
27-03-2022, 08:57 PM
30971


this is triac-fanuc ats

m_c
27-03-2022, 09:14 PM
I've seen that machine before, but I can't remember where the details were posted.
The linear rails aren't original.

Buckis
27-03-2022, 10:13 PM
https://www.denfordata.com/bb/viewtopic.php?f=13&t=5933

here they saying "linear rails from factory as standard" sadly no pictures

anyway 5K +vat i think is way to much, most electronic should go to the bin reuse servos probably no chance