PDA

View Full Version : need someone with cnc brains help



steveie_e
18-02-2008, 06:02 PM
hi, ok ive made an rockcliff machine and have a slight problem the bed seem to be a little higher on the right hand side i was going to add another piece of mdf on top of the bed. But what i need piece g-code to level the bed, the bed is 340mm x 340mm ive tried but just cant get the gist of it ?

hope someone can help me with the basics :?:

i'm using Mach 3
thanks for looking steve

steveie_e
19-02-2008, 11:23 AM
thanks very much kip i will give it ago this afternoon thanks again steve :)

Lee Roberts
29-05-2008, 04:43 AM
Did it work?

Lee Roberts
07-06-2008, 05:33 PM
Any chance you could reup this to the post i think the change of forums has lost it. Wouldnt mind it formyself to.

Lee Roberts
08-06-2008, 10:50 AM
Thanks kip, i will move this to the FAQ section to.