Part Manufacture Required (1 off)

[antsals]

I'm after a quote for the 1 off motor mount plate as per the attached drawing.

Included within the zip file is a Solidworks model and a .dxf file.

Material either Aluminium or Steel (no specific grade required)

Will pay via Paypal

Post to Lancashire, UK

Required ASAP.

Any questions drop me a mail.

Regards,
Anthony

[Robin Hewitt]

How deep are the countersinks (incidentally M8 cap heads require 13mm).

What is the tolerance?

Do you supply the metal?

Robin

[John S]

They look like counterbores to me, not enough detail on the drawing.

.

[Robin Hewitt]

They look like counterbores to me

Patently age has addled my speech centre :heehee:

[John S]

Patently age has addled my speech centre :heehee:


And your typing finger :rofl:

[antsals]

Not M8 counterbores. There to allow for some float on M6.

I'm after full supply material and machining and delivery.

Had missed I hadn't dimensioned the counterbores, I will update. There are counterbores on the back also.

[antsals]

Just updated the drawing with counterbore dimensions, also plate thinkness increased to 12mm

[John S]

That's OK I'll still do it out of 10mm because you have plus or minus 2mm tolerance :naughty:

Not grinding your nuts off but yes the drawing is clear enough, I'll have a look tomorrow and see if I have any plate in, probably be 1/2" though if I have? any good ?

[Robin Hewitt]

see if I have any plate in, probably be 1/2" though if I have? any good ?

Same here, nearest I have in plate is 8mm but I've got a 4m length of 6" x 1/2" alloy :naughty:

[antsals]

1/2" would be great, Just a mini skim to ensure its flat. Think my 10mm + or - 2mm was trying to make it easy for people t find plate. Would prefer closer too 12mm. How much then?