View Full Version : RFQ: Project Case End Plates Require Making

17-08-2010, 09:03 AM
Hi All

I need ten or twenty sets of end plates cutting for a project case I am working on.

Each plate is 27mm by 78mm. One plate needs one hole cutting in it for a subd25 and the other plate needs three holes cutting in it for a usb port, led and small reset switch.

This is a very light job, the end plates themsleves are supplied with the cases, I just need the holes cutting as above.

This is the actual case and you can see the end plates.

http://www.rapidonline.com/sku.aspx?tier1=Tools,+Fasteners+%26+Production+Equ ipment&tier2=Cases&tier3=Metal+Cases&tier4=1455+Series+extruded+aluminium+enclosures+wi th+metal+end+panels&moduleno74372&catref=30-1562

Please contact me on 07870-903552 or message here with your details and I will call you.