PDA

View Full Version : NEW MEMBER: Hi I am from mexico



leem123
23-08-2010, 10:03 PM
Hi I just presenting my self, my name is Luis Eduardo Martinez and i just signed in, so hellow every body

irving2008
23-08-2010, 10:28 PM
Hi Luis and welcome to the forum. Have you built a machine yet or just thinking about it?

Swarfing
23-08-2010, 10:31 PM
Buenos dias mi amigo

leem123
23-08-2010, 10:40 PM
Hi irving, no I haven't build a machine just yet I do own a small no cnc metal lathe and a drill mill and i have build a few accesories for printing shops arround the place were i live, i am currently employed as repair tech. in a news paper print shop and i was looking to add a dividing head to my mill, so looking on the internet i run across an article about a stand alone cnc indexing table, and so hera i am, I will be posting my progres as I go on, but first I have to get my hands on the project, thank you for welcom me. hope i'll hear from you soon.

leem123
23-08-2010, 10:43 PM
Hola 2eopoz como estas mucho gusto en conocerte I hope not to get in trouble because of the language...

Swarfing
23-08-2010, 11:11 PM
Habla in espanol es no problema aqui...Buenos notches

Swarfing
23-08-2010, 11:12 PM
notches? es mal....................... noches

irving2008
23-08-2010, 11:40 PM
yeah, wot he said :lol:











My Spanish is very little and very rusty! but then so is my italian, french and dutch...

leem123
24-08-2010, 01:52 AM
Hellow again every body my english as you might noticed it is not very good either but i am doing my best, i am sorry for not answering your mesages right away but i just got off work, i apologize, nice to meet all of you thanks

leem123
24-08-2010, 01:56 AM
My english is the same, he asked if notches was wrong an it is Noches is right

leem123
24-08-2010, 01:58 AM
Hola otra vez 2e0poz si noches esta mal una disculpa por tardarme pero apenas sali del trabajo