PDA

View Full Version : NEW MEMBER: Hello, I am Chris



cdb
24-08-2010, 01:09 PM
Hello, I am Chris,
I am investigating into the costs and possibilities of (mis)using a
cnc for a digital microscope . . .
If you wonder why: I have a lot of microfiches (no not fishes) and by
combining a digital microscope and a cnc I want to automate the digitizing
of the microfiches.
Of course I have a microfiche reader but that is a big apparatus.
Of course there are companies that offer digitizing microfiches but that's no fun.
Greetings form the Netherlands,
Chris

irving2008
24-08-2010, 02:09 PM
Hi CHris and welcome to the site. That sounds an interesting project and one I am sure a number of our members could offer ideas on.

Lee Roberts
24-08-2010, 02:57 PM
Hi Chris, very much intrested in how you get on with this. I look forward to seeing the project come to life as a build log :)

i2i
24-08-2010, 03:47 PM
on a purely physical level, that should work fine. A small router would be perfect for it

i2i
24-08-2010, 03:53 PM
or just an x/y table on the machine itself