Turtle
09-09-2010, 12:03 PM
Hello. I've registered to spend a while reading to absorb as much information as I can before deciding if actually getting a cnc machine is the right move.
I've been researching for a while.... my main conclusion being that I need to research more!
Initially I'm thinking of milling small wood peices (on the order of 120mm x 120mm x 60mm), drilling the odd aluminium box and perhaps routing PCB's - all for making cases really for DIY Hifi.
However, I'm also a car nut so it's tempting to look for some capability for metalwork, evenif only aluminium.
So that moved me from thinking about gantry style CNC routers to perhaps a small mill - Sieg X2 / Peatol Micro Mill. If the working area is large enough, then such a machine should handle the woodwork/drilling easily, PCB's with a suitable spindle and the odd aluminium part for the car.
I'm leaning towards the Peatol - I like the belt drive as standard, lead screws that can be used for some CNC use without replacing them and just the general impression I get.
But my main conclusion is I'd best spend a lot longer getting a feel for what requires I should use to decide the right machine etc in order to try and get something fairly suitable first time.
-Brian.
I've been researching for a while.... my main conclusion being that I need to research more!
Initially I'm thinking of milling small wood peices (on the order of 120mm x 120mm x 60mm), drilling the odd aluminium box and perhaps routing PCB's - all for making cases really for DIY Hifi.
However, I'm also a car nut so it's tempting to look for some capability for metalwork, evenif only aluminium.
So that moved me from thinking about gantry style CNC routers to perhaps a small mill - Sieg X2 / Peatol Micro Mill. If the working area is large enough, then such a machine should handle the woodwork/drilling easily, PCB's with a suitable spindle and the odd aluminium part for the car.
I'm leaning towards the Peatol - I like the belt drive as standard, lead screws that can be used for some CNC use without replacing them and just the general impression I get.
But my main conclusion is I'd best spend a lot longer getting a feel for what requires I should use to decide the right machine etc in order to try and get something fairly suitable first time.
-Brian.