From, Liege Belgium

[A2P]

Hello from Belgium Europe,

We have make with succesful modification Z axes on SX3, reduction 2/1 and Nema 34 size motor and gas spring from CNCFUSION + de luxe kit & héli-call.


Thanks
Patrick from a2p (a2p.be)

[irving2008]

Hi Patrick and welcome to the site. Some nice work on your website (http://www.a2p.be). I have re-posted your question for you in one of the other forums (http://www.mycncuk.com/forums/showthread.php/2359-Motor-size-23-and-2-1-reduction-for-Z-axe-on-SX3-retrofit.)as this forum is for introductions only.

[A2P]

Hi Irving,
Thanks for your response and re-posted, sorry i have not understand for introduction.

For introduction i thing:

We are some friends here in Belgium near Liege have a passion to cnc retrofit mill and lathe, not commercial in this moment, perhaps in an other live..
We retrofit now an SX3 with long travel table (RC20BFN) from RC-Machine (Luxembourg) with CNCFUSION kit and Mach3.
We continue different experimentation wtih Pokeys55, MPG, different motor size, step, dc, brushless, enclosur etc...
We have a little site on http://www.a2p.be.
We explain the result off ower experimentation and futur way we expect go.
A2P come from the 3 first member Alan, Patrick & Patrick, they have experience in different interesant CNC way, - mechanical, electronic, cnc gcode and machine user etc...
We are happy to come on machinist community MYCNCUK.

Best regards.
Patrick