rnr107
06-10-2010, 01:04 PM
----------- SOLD ----------------
SPECIFICATIONS:
550W Motor (~3/4hp)
Drilling Capacity : 13mm (1/2")
Face Milling Capacity : 30mm (1.2")
End milling Capacity : 16mm (5/8")
Longitudinal travel : 300mm (12")
Cross Travel : 130mm (5.12")
Working table size: 460mm x 112mm (18" X 4.5")
Max distance spindle to table 200mm (7.88")
Spindle taper : MT#3 , M12 Draw bar
Spindle Speed: 50 - 2500rpm
Spindle Rotary Angle -45°/+45°
FEATURES:
Dovetail column
Safety shut off switch
Adjustable depth stop
Fine feed head control
Geared drive
Clear guard on spindle
Rubber chip guards on ways
Metric dials
Adjustable dovetail ways on column
Comes with Drill chuck and Milling vice ... Please Email or PM for pictures.
£300.00
SPECIFICATIONS:
550W Motor (~3/4hp)
Drilling Capacity : 13mm (1/2")
Face Milling Capacity : 30mm (1.2")
End milling Capacity : 16mm (5/8")
Longitudinal travel : 300mm (12")
Cross Travel : 130mm (5.12")
Working table size: 460mm x 112mm (18" X 4.5")
Max distance spindle to table 200mm (7.88")
Spindle taper : MT#3 , M12 Draw bar
Spindle Speed: 50 - 2500rpm
Spindle Rotary Angle -45°/+45°
FEATURES:
Dovetail column
Safety shut off switch
Adjustable depth stop
Fine feed head control
Geared drive
Clear guard on spindle
Rubber chip guards on ways
Metric dials
Adjustable dovetail ways on column
Comes with Drill chuck and Milling vice ... Please Email or PM for pictures.
£300.00