View Full Version : NEW MEMBER: Hello all.....Carlisle

18-10-2010, 12:09 PM
Hello people! My experience of CNC stuff is within secondary education. Have got at the moment a Gravograph LS100EX 30W laser cutter - that's another story though.... and a Roland EGX300 CAMM2 mini router. Also have a Boxford A3 HSRi machine - but this is one I have no experience of using yet.
The laser cutter is new - but not yet working as it arrived faulty. Engineer has been and replaced 2 circuit boards - but the machine is still U/S and awaiting further parts from France.....so me and CNC have fallen out at the moment. I had the same laser in my last school and it was great - which just makes the wait worse!:confused:

Will enjoy having a look round


Lee Roberts
19-10-2010, 01:23 AM

Welcome to the site, your membership has been approved and you now have full access.


19-10-2010, 12:46 PM
Excellent thanks!

Quite apt really as this morning I have been installing my Roland CAMM2 EGX300 so it is now ready to roll!