PDA

View Full Version : NEW MEMBER: Hello from the USA, Ann Arbor, MI



watanabe
26-10-2010, 01:19 AM
Hello, I'm trying to download 2 files I thought looked useful for designing my router, found here: http://www.mycncuk.com/forums/showthread.php/2023-Some-thoughts-on-cnc-machine-design-principles-.-.-

required me to register, so here I am :)

Lee Roberts
27-10-2010, 12:07 PM
Hi,

Welcome to the site, your membership has been approved and you now have full access.

Please post your questions in the correct forums for the best assistance.

Lee

George_Race
30-10-2010, 02:04 AM
Hi there, I am between Jackson and Albion, about 45 minutes West of you.
I have a home made CNC setup and currently am making experimental airplane parts.

If you would like to stop by some time and chat just let me know. Retired so here a lot of the time.
You can visit my web site and see some of the stuff I am making and there are some pictures of my setup.
http://www.mykitairplane.com
George