PDA

View Full Version : NEW MEMBER: Hi from Kent



usedplcs
11-11-2010, 04:20 AM
Hi All,

On my list of items to do is build a CNC machine, (Its been on the list for a while!)
so look on the forum with great interest.
I have good knowledge/interest of PLCs, Servos, Robotics and programming So hopefully I should be able to pass some valuable knowledge and pick some great tips up to.

irving2008
13-11-2010, 03:55 PM
Hi there and welcome to the site. Lots of info here and look forward to your contribution...