PDA

View Full Version : new build, need guidance on electronics etc



deannos
13-11-2010, 02:11 PM
Hi, this will be my first build so i have decided to go with the following-
http://buildyourcnc.com/cnckitintro.aspx

I have already bought the plans, just in the middle of converting everything to metric. I will be mainly cutting MDF, soft wood and some hard woods. For the electronic side of things i have seen this kit-
http://buildyourcnc.com/electronicscombo.aspx.

But i understand from reading on this site that it is preferable to use separate boards in case things go pop. Is there a cheaper alternative for a complete novice to use

m_c
14-11-2010, 03:45 AM
Your electronics kit link is wrong...

irving2008
14-11-2010, 11:34 AM
You might have a look at www.diycnc.co.uk (http://www.diycnc.co.uk) for an alternate electronics configuration

deannos
14-11-2010, 03:38 PM
Sorry about that the link should be
http://www.diycnc.co.uk/html/cnc_systems.html