PDA

View Full Version : NEW MEMBER: Hi From Shropshire



Steve-m
08-09-2008, 08:16 AM
HI

My name is Steve, I live in a small village in Shropshire called Chirbury, my project is a 4`x4` plasma table, at the moment I have the Bridge 75% complete with a home made Z axis with 150mm of travel with a Tripazoidal lead screw, and a 3Nm stepper. A 1.4mtr, 25mm linear rail Y axis with a 1mod gear rack and pinion, also with a 3Nm stepper. the X will be 10 cam follower bearings running on and guided by 75x12 cold rolled steel, driven by 2 off 3Nm steppers, one each side. all designed in Auto CAD. the plasma unit is a Thermal Dynamics 75xl with a capacity of 20mm. I dont have any electronics yet, other than a PC with Mach3 on it, I am hoping to get a Candcnc torch head control from America,

Steve

Lee Roberts
08-09-2008, 03:19 PM
Sound like an exciting project, welcome to the forums and thanks for joining.

Be sure to start a build log for us to all view and comment !

Lee