PDA

View Full Version : NEW MEMBER: New member in Cambridgeshire



Rarius
12-12-2010, 11:25 AM
Hi,

While I'm an experienced software engineer and have done hardware control in the past, I'm just starting out building my first CNC project. I intend to use it for carving wood, plastic (model making) and aluminium if possible.

A year or two ago I bought a load of stuff on eBay from a guy who had the same idea but never finished his machine. I got four leadscrews with nuts and three pairs of ground bars with linear bearings... not bad for £50!

Since then I have slowly been designing and building the first incarnation of the machine. I am on a shoestring budget, so I won't be buying $1000 drivers or spindles.

Regards

Phil

irving2008
12-12-2010, 04:32 PM
Hi there Phil and welcome to the site. Dont forget to post a build log to track your progress...