PDA

View Full Version : FOR SALE: bearing/belts



oadamo
01-01-2011, 06:09 PM
now sold thanks adam

Jonathan
01-01-2011, 11:37 PM
I'm interested in some of the angular contact bearings and belts. I'll check tomorrow if any of the belts are sizes I need...do you happen to have any spare timing pulleys?

Please could you give me a rough price for the 7205 bearings? I'm thinking of using either angular contact bearings that size or tapered roller bearings around that size for B/C axis.

Just looking up the other part numbers...

oadamo
02-01-2011, 12:08 AM
I'm interested in some of the angular contact bearings and belts. I'll check tomorrow if any of the belts are sizes I need...do you happen to have any spare timing pulleys?

Please could you give me a rough price for the 7205 bearings? I'm thinking of using either angular contact bearings that size or tapered roller bearings around that size for B/C axis.

Just looking up the other part numbers...


hi i have a few timing pulleys i will get some pics up tomorrow ive also got about 5-10 1/2in spockets that i think are 10-18 tooth, ive got to dig them out of my shed and sort the ones out i need for my plasma project then sell the rest.
you can have the 10 bearing for 20 and the belts for 2 each dont no how much for postage but i can see it being more then 3-5 quid.
adam

Jonathan
02-01-2011, 12:21 AM
hi i have a few timing pulleys i will get some pics up tomorrow ive also got about 5-10 1/2in spockets that i think are 10-18 tooth, ive got to dig them out of my shed and sort the ones out i need for my plasma project then sell the rest.
you can have the 10 bearing for 20 and the belts for 2 each dont no how much for postage but i can see it being more then 3-5 quid.
adam

That sounds good. I'll almost certainly be interested in the timing pulleys. I'm aiming for 10:1 reduction with two belts. I could CNC mill them like I did for X axis, but it's a lot of effort. I'll give you a definite answer about the bearings when I've done some drawings...tomorrow.

Are the angular contact bearings sealed?

Thanks,

oadamo
02-01-2011, 12:57 AM
That sounds good. I'll almost certainly be interested in the timing pulleys. I'm aiming for 10:1 reduction with two belts. I could CNC mill them like I did for X axis, but it's a lot of effort. I'll give you a definite answer about the bearings when I've done some drawings...tomorrow.

Are the angular contact bearings sealed?

Thanks,

hi ive just opened one are there not sealed you can see the cage holding the bearing, i will post a better pick of one of the bearing for you tomorrow.
adam
just taken a couple of pics

Jonathan
02-01-2011, 01:03 AM
Hmm, I guess making a seal or something is the least of my worries. This is what I'm thinking of using them for:

3528

A pair on each side of the spindle should be pretty solid.
Which mounting type are they, DF/DT/DB?

http://www.skf.com/skf/productcatalogue/jsp/viewers/productTableViewer.jsp?&lang=en&tableName=1_3_2&presentationType=3&startnum=3

oadamo
02-01-2011, 01:07 AM
Hmm, I guess making a seal or something is the least of my worries. This is what I'm thinking of using them for:

3528

A pair on each side of the spindle should be pretty solid.
Which mounting type are they, DF/DT/DB?

http://www.skf.com/skf/productcatalogue/jsp/viewers/productTableViewer.jsp?&lang=en&tableName=1_3_2&presentationType=3&startnum=3

see what you mean with that pic.
on the bearing its got (skf 7205 bep austria s)
adam

oadamo
02-01-2011, 01:09 AM
http://www.skf.com/skf/productcatalogue/jsp/viewers/productTableViewer.jsp?&tableName=1_3_1&presentationType=3&startnum=2
found this.
adam

Jonathan
02-01-2011, 08:02 PM
http://www.skf.com/skf/productcatalogue/jsp/viewers/productTableViewer.jsp?&tableName=1_3_1&presentationType=3&startnum=2
found this.
adam

Thanks for that. Looks like they might not be the best bearings for this application, still thinking.

Did you find any pulleys?

oadamo
03-01-2011, 12:43 PM
Thanks for that. Looks like they might not be the best bearings for this application, still thinking.

Did you find any pulleys?
hi mate no i havent had chance yet iam to busy with work, but iam going to have a go at sorting everything today bacause i have a day off :)