View Full Version : FOR SALE: 4 Axis TB6560 Stepper Motor Driver Board

Mad Professor
04-01-2011, 01:49 PM
The time has come to sell my 4 Axis TB6560 stepper motor driver board, as I have now reached the limits of this board, and now upgrading.

I have been running this board at 28volts, and is as far as I am willing to push it.

On my current setup I get a feed rate of around 500mm/min, using ASTROSYN MY103H702 1Nm Stepper Motors, and TR10x2 trapezoidal thread.

These boards are still selling on eBay for around 50.

Open to sensible offers, postage will be around 5 for UK mainland.

If I don't get any interest in the next few days, I will put this up on ebay.

Best Regards.

04-01-2011, 05:54 PM
Think you'll find the limiting factor is the motor not the board - these are high inductance motors. I have the same motors and even on 36v can't get more than 300rpm (600mm/min on TR10x2) on my small machine. If you want more speed its the motors you need to change not the board...