PDA

View Full Version : FOR SALE: For Sale: Various router bearings bits/screws


Jonathan
08-01-2011, 04:57 PM
See the photo's below for what I've got. Make me an offer for any/all of it. Post or collection welcome.

12 of the standard alu-angle linear bearing things.
Two M12 stainless threaded rods with ends accurately machined to fit bearings..
Anti backlash nut using spring for the above...
deannos
23-05-2011, 05:13 PM
Two M12 stainless threaded rods with ends accurately machined to fit bearings..

Hi what is the lenght of these

How much for the alu-angular bearings, backlash nut and threaded rods please

Dean
Jonathan
23-05-2011, 05:35 PM
Two M12 stainless threaded rods with ends accurately machined to fit bearings..

Hi what is the lenght of these


1000mm and 450mm ish. I've not got them with me at the moment so can't measure more accurately, but that should be pretty close. If you want me to shorten them / machine differently then I'm happy to do so.

I'll send you a PM.
deannos
23-05-2011, 09:49 PM
Hi,
Replied to pm

Dean
Jonathan
08-06-2011, 04:43 PM
Most of this is now sold. Just the angled bearing things made with the block of aluminium and steel shaft remaining. There's 4 of them.
deannos
09-06-2011, 02:52 PM
Hi Jonathan,
Just to let you know, this all turned up this morning all well. And like you said it was well packaged and took a while to get into it.


Cheers

Dean