View Full Version : NEW MEMBER: Hello from Rotherham

09-01-2011, 06:42 PM
I'm located in Yorkshire in the Uk and have a modest manual workshop. Although I have a Seig super X1 bought with a view to a CNC conversion.

I'm presently collecting parts and info for a go at a digital drive for a rotary table by way of a shallow entry and to assist in building a timepiece.

I did build a 3 axis board from Camtronics a long while ago but only managed to get two of the three axes sort of working at set up stage. Last time I looked the one I have is way out of date.

Have some 3D CAD experience and been at miniature engineering and home machining a while.

Best wishes


11-01-2011, 02:26 PM
Hi John, and welcome to the site. Are you building the rotary controller based on Kwacker's design elsewhere on this site?

17-01-2011, 08:12 PM
Hello Irving
Yes that's the one I'm interested in. I have begun collecting some of the parts and am presently swotting up on programming pics and trying to decide to go for a finished programmer or build one myself.