PDA

View Full Version : need help



k2me
22-01-2011, 03:20 PM
Hi every oone just wondering if any of you can help i have morbidelli 504 and ive just set it up but the electro spindles are going in the wrong direction. any one ever have the same prob or how will i fix this thanks.

m_c
22-01-2011, 05:22 PM
Just done a quick google, and see that's quite a 'substantial' machine!

I'm guessing the spindles will be powered by 3 phase, so it sounds like you just need to swap two of the 3 phase wires around, which will change the direction of all the 3 phase motors.

k2me
23-01-2011, 01:02 AM
hi thanks ive thought of that but because its a electro spindle changing the wires wont make any differance as far as i know i think its got to do with the signal the machine is sending to the motor im not sure if there is just a setting on the set up that you can change when loading the program.

M250cnc
23-01-2011, 11:16 AM
How are you starting the spindle

G code, MDI, hardware panel button ?

Phil

Sent from my HTC Desire using Tapatalk

m_c
23-01-2011, 05:44 PM
I would of thought the spindle on that size of machine would be some form of 3 phase motor, either powered directly or via a VFD.
Swapping the wires to the machine would only take a couple minutes, and rule out it being something that obvious...

Is it possible to control the spindle speed?

k2me
23-01-2011, 09:48 PM
hi phil startin it with g code runnin a program

k2me
23-01-2011, 09:51 PM
hi swapped the supply today made no change to the direction. would have been i nice fix if it worked

M250cnc
23-01-2011, 10:07 PM
hi phil startin it with g code runnin a program

OK it may be the post processor.

On MDI try M3 normal spindle forward

Try M4 spindle reverse

M5 is spindle off

Just put whatever works in the PP

Phil


Sent from my HTC Desire using Tapatalk

k2me
24-01-2011, 11:43 AM
ok cool ill give that a go and ill see what happins
thanks phil

zebbyz
30-05-2014, 02:10 AM
Did you get any manuals with your 504 ? I have the full parts manual for it 729 pages - 5 languages ... but after an operators manual or something useful ... !

And what have you made on your 504 ?

Cheers
g