PDA

View Full Version : Help with setting up my cnc and engraving machine's



soyeb
27-05-2011, 02:13 AM
Hi all,

I have an engraver and a cnc with 2 power boxes made by dahlgrem or dehlgram (not sure how its spelt!), from a company in California.

I would like some help in setting it up and was hoping to find someone with the expertise. the machines are old so was really hoping if i could get help setting it up on a new computer.

I would really appreciate your help.

Thank you!

p.s if you could come to my place in walsall then that would be greatly appreciated and would let you use the machine's for whatever you want. if not then over the net is fine.

Jonathan
27-05-2011, 11:40 AM
Hi,

It's spelt dahlgren. I'm about an hours drive from you so could potentially come over (PM me?).

Can you tell us any more about the machines and the current drives? By setting it up on a new computer do you mean setting it up with Mach3?

soyeb
30-05-2011, 11:51 AM
Hi Jonathan,

Thanx for your reply.

I would really appreciate that. do you have a number i can call you on or an email???

thanx