PDA

View Full Version : FOR SALE: Bits for Sale



petesurrey
25-07-2011, 02:02 PM
Well i finally bit the bullet and bought a cnc router as i needed it urgent.I was in the process of collecting all the bits to build my own. These are now surplus to requirments and are as follows:

4 off lengths linear bearing shaft solid steel 25mm dia 1m long
8 off SC25UU 4 hole linear closed bearing blocks to suit the above
2 off Ballscrew 16mm dia with anti backlash nut fitted 1062mm long 5mm pitch
1 off Ballscrew 16mm dia with anti backlash nut fitted 362mm long 5mm pitch
2 off 8mm to 8mm rigid coupelings
1 off 15-T5-21 Timing Pulley 15 Teeth 8mm Bore
1 off 50-T5-21 Timing Pulley 50 Teeth 8mm Bore
1 off T5 Timing Belt PU Steel Reinforced 100 Teeth
2 off lengths linear bearing shaft solid steel 8mm dia 400mm long
4 off std linear ball bushings to suit above
1 off aluminium tooling plate 700x700x25mm thick (this was for a very strong bed)

All the above excluding the alluminium tooling plate cost me £580.91 and the ally plate cost £240 so all in £820.91
Ideally i would like to sell to someone that can collect but at a push i may be able to send but could be costly. I am after selling all to one person. This could have made a much better machine than i have just paid 2 grand for but the lack of time forced me.
I would like to get at least hald of what i have paid make me an offer otherwise it will be going on ebay. Cheers by the way im located near Gatwick airport.

the datasheet for the ball screws are here http://www.cnc4you.co.uk/resources/Ballnut+data.PDF (http://www.cnc4you.co.uk/resources/Ballnut+data.PDF)

dendrobated
24-08-2011, 07:46 PM
Hi, I am looking to build/buy a cnc router. Are these still for sale?

D-man
27-10-2011, 06:55 PM
Is there anything left?


---
I am here: http://maps.google.com/maps?ll=54.976688,-1.517420