PDA

View Full Version : Vectric Post Processor



p1lts
08-10-2011, 07:15 PM
Hi I've purchased a new machine with a Leetro MPC6610 DSP controller. I'm using Vcarve to generate the G-code.
I have a small query. Altering the settings for the spindle speed and feed speed don't appear to make any difference. Is this due to the post processor?
At present I am just selecting the basic G-code post processor.

Thanks for any help.

Ian

John S
08-10-2011, 08:48 PM
Try the Mach2-3 arcs mm one and see what that spits out.

p1lts
08-10-2011, 09:02 PM
Try the Mach2-3 arcs mm one and see what that spits out.

I think you are correct John, perhaps trial and error is the best option.

To be fair, I have now got hold of the manual for the controller and you can change the feed rates and spindles speeds "on the fly" anyway, so the problem has sort of gone anyway although it would still be nice to be able to specify the values in Vcarve.