PDA

View Full Version : WANTED: 2 x 20/16mm supported round rail



D-man
17-10-2011, 04:08 PM
Hey guys, im looking for the above at 1600mm in length.

Let me know what you have

Jonathan
17-10-2011, 04:17 PM
Assuming this is for a router I would advise at least 20mm, ideally 25mm but certainly not 16mm.
I will have spare 2*900mm, 2*600mm SBR20 with total 8 bearing blocks at some point in the near future.

D-man
17-10-2011, 04:22 PM
too short mate, whats the deal with the spindle mounts?

D-man
27-10-2011, 06:47 PM
Ok guys also considering linear rails. Let me know what you have, cash money waiting ;)

D-man
30-10-2011, 11:08 PM
Bump bump. anyone?