PDA

View Full Version : NEW MEMBER: Hello CNC peeple



Tonyel
20-10-2008, 11:09 PM
Hi everyone. Have just joined after getting annoyed with my lousy cheap router table fence and seeing a linear bearing in a scrapyard! That got me thinking - maybe I could make a nice sliding table for my router; then, maybe it could be powered, and move in two dimensions; but wait a minute: it could move up and down too, and be controlled by a computer, and live in a building of its own, with its own generator, under a dormant volcano, and I could use it to build a rocket, AND TAKE OVER THE WORLD HAHAHAHAHAHA!!!

Or maybe just buying a better fence would be easier.

Tony

Lee Roberts
20-10-2008, 11:50 PM
hehe, Welcome to the forums Tony !

irving2008
21-10-2008, 12:12 AM
Yeah, welcome Tony...:)

Its not you that will be taking over the world.... it'll be the CNC hobby that takes over your life... just start building a little one and before you know it you'll be planning versions 2 and 3 even before #1 is completed...:)

Lee Roberts
21-10-2008, 12:16 AM
Yeah, welcome Tony...:)

Its not you that will be taking over the world.... it'll be the CNC hobby that takes over your life... just start building a little one and before you know it you'll be planning versions 2 and 3 even before #1 is completed...:)


irving...

PLEASE DO NOT DISCUSS MY PERSONAL LIFE WITH OTHER MEMBERS :cool::p

irving2008
21-10-2008, 01:01 AM
and I thought I was talking about mine :o