PDA

View Full Version : FOR SALE: Equipment for sale



aceman
23-01-2012, 02:35 PM
Hi all,
Having a major clearout.

SIEG X0 Digital Micro Mill (Drill) used two times only absolutely mint.
JT1-ER11 Milling Collet Chuck Set with 6 Collets unused and boxed, got them to use with the Micro Mill.

SIEG X3 Small Mill spindle motor, unused 600w DC I removed this of my new X3 to fit a different spindle motor. Note I have not got the speed control PCB.
Cast Iron Work Table X200mm, Y90mm travel, unused.

NSK Linear Guides, and rails 15mm, and 20mm wide unused and boxed.
Rails 2x15mm, and 4 guides, 520mm long.
Rails 4X20mm, and 8 guides, 520mm long.

NOGA Mini-Cool, Model No: MC1400.

Sax-165-Servo-Motor, 3 off without encoders.
Servo-Motors-NEMA-23-350oz-in-60VDC, 3off, with encoders, and not used on a machine.
Servo-Drive-BSD810A, 3 off. Old technology, and not used on a machine.

ETA Desk Console, good for putting all drives, PSU controller in , and the sloping top face for HMI/Panel PC, unused. Ref No: ZBA6-01 Monobloc Desk 600x1000x400 RAL7035.

Please PM me for more details; I am open to all offers.

dain
27-02-2012, 02:43 PM
Do you still have the Sieg X0 for sale.

Can not work out how to send a PM.

email is dain.dod "at" gmail dot com if you see what I mean

aceman
27-02-2012, 07:46 PM
Sorry but the SIEG X0 has been sold.

Cheers,

aceman.