PDA

View Full Version : NEW MEMBER: Greetings from Estonia



idegraaf
02-02-2012, 10:58 AM
Hello
Kalle from Estonia and I am very interested in building a CNC. I am a hobby builder and try to find new solutions for the construction of the CNC. My first CNC was ready or operational, in June last year. It was made on the basis of buildyourcnc.com, but was made ​​of metal. Since I do not have the opportunity to use the welding process, the next machine is made ​​of plywood. I really like the design of plywood products. I thought, why can not a machine made of plywood. Buildyourcnc.com it is very well received and it is a very good design. But I wanted to test myself and start a new design.

Pictures later,
regards

idegraaf
06-02-2012, 10:33 AM
Here are pictures allowed.
Table size is 1200x950 and cutting area 800x850x100
Cutting speed 1000mm/m
Trapezoidal screws used 1604 for 2 y-axis and 1 x-axis,1203 for z-axis.
NEMA 23 425oz motor for each axis.
Bearings are a local bearing store,V-groove bearings will come later
Software Linuxcnc.
Currently, the testing phase, but works.Needs many upgrades.


New gantry sides,made with this machine.
5305

Two trapezoidal nut per screw
5304

Router from hobby store
5302

x-axis
5303

idegraaf
06-02-2012, 10:52 AM
Table size 1200x950 and cutting area 800x800x100
Trapezoidal screws used 1604 for 2 y-axis and 1 x-axis,1203 for z-axis.
Nema 23 425 oz motors for each axis.
Bearings from local bearing store, later update to V-groove bearing.
Software Linuxcnc
The machine is in the testing phase

New gantry sides,made with this machine.
5306

Router from hobby store
5307

Hammer,if something does not work :)
5308

Trapezoidal nuts 2 per screw
5309
Regards,
Kalle