PDA

View Full Version : FOR SALE: Stepper Drivers + PSU's



Shinobiwan
03-03-2012, 08:14 PM
Hi

I have a few Switch Mode Power Supplies pulled from a new machine that I've upgraded. A few hours use only. All PSU's are 230v input, have cooling fan installed, are CE certified and are housed in a metal casing.

36v 11A (400w) with voltage adjust pot for approx 36 +/-4v adjustment range 20
48v 7.8A (350w) with voltage adjust pot for approx 48 +/-5v adjustment range 20
60v 8.3A(500w) with voltage adjust pot for approx 60 +/-5v adjustment range 20

For a rough idea of how these look they're similar to this model but with a fan in the top:

http://www.cnc4you.co.uk/index.php?route=product/product&path=81&product_id=33

All prices are +postage or your welcome to collect from Chesterfield, Derbyshire. Have paypal too if needed. Also have ebay account with 900+ positive feedback in case my low post count is off putting. JazzCNC might vouch for me too if he's in good mood.

HankMcSpank
03-03-2012, 11:10 PM
Hi

First up are two PM542 4.2A/50v drivers. More details can be found here:

http://www.zappautomation.co.uk/pm542-microstepping-driver-p-5.html?cPath=9_3_4

Wanting 35 each or 65 for the pair.



I'll take the pair... :smile:

Shinobiwan
04-03-2012, 12:51 AM
I'll take the pair... :smile:

Sold. PM sent.

JAZZCNC
04-03-2012, 12:24 PM
JazzCNC might vouch for me too if he's in good mood.

Dodgy character very dodgy.!!. . . . . . .3 Bleeding hours it took to get a cuppa tea and even then only when his lovely mother came home did I get one.:heehee:

It's been a rough week mate every thing gone tit's up so I'm bear with sore ARSE. .http://www.mycncuk.com/forums/images/smilies/icon_twisted.gif .

Shinobiwan
04-03-2012, 03:33 PM
Haha, I thought the kettle was broke!

Shinobiwan
07-03-2012, 06:56 AM
Price reduced.

Shinobiwan
14-03-2012, 10:09 PM
Just the two 80v drivers and the 60v PSU left. Prices reduced again. They're off to ebay in a couple of days.

Brinner
16-03-2012, 08:03 PM
Just the two 80v drivers and the 60v PSU left. Prices reduced again. They're off to ebay in a couple of days.

Hi are drivers still available if so drop me a line

Alan

Shinobiwan
16-03-2012, 11:05 PM
Hi

The drivers are provisionally sold to JazzCNC.