PDA

View Full Version : wall cnc like the wall saw



crossleymarko
23-03-2012, 10:37 PM
so i was thinking:naughty:
is it possible to build a wall mounted cnc, like a wall saw... is this a new concept.? is it possible..

its a space saver if all of the above, mmm:confused:

so what do we think.

id be interested to know, cant find much on't tinternet.. but who knows..
would the gantry be a problem?

any ideas

Jonathan
24-03-2012, 01:41 AM
http://www.mycncuk.com/forums/showthread.php/4222-Time-to-go-vertical-!

crossleymarko
24-03-2012, 01:51 AM
arrrgghh i looked on utube. and google... . loads. so it is possible, spose i was looking faor wall cnc etc not vertical ...

any thoughts on it then.

hey jon are you one of them people that just point when asked for directions.... lol

luke11cnc
24-03-2012, 09:52 AM
no Jonathan/Jazz will become your best friend just to mention a few and o'my god can they talk/type a post.

James

JunkieHobbo
24-03-2012, 03:32 PM
JAZZCNC is your man for the Vertical CNC, I like the concept and would do it if I had the right space for it!


no Jonathan/Jazz will become your best friend just to mention a few and o'my god can they talk/type a post.

James

They can, but I must say that everything they do say is very valuable and will help you a long way in your design. They are both very knowledgeable, they have helped me alot in my design so far, hope it continues! :whistling:

motoxy
24-03-2012, 09:00 PM
They can, but I must say that everything they do say is very valuable and will help you a long way in your design. They are both very knowledgeable, they have helped me alot in my design so far, hope it continues! :whistling:

They certainly do. Listen and you will learn.

JAZZCNC
25-03-2012, 12:19 AM
hey jon are you one of them people that just point when asked for directions.... lol

Why waste words when you can get some other muppet to say it all for you. .:naughty:. . . . Erm which muppet would I be.????? . . . Oh Oh I know one of them piss taking old bastards sat in them theater box's . :rofl:

Anyway here's my thoughts on it.!! . . . . Don't hesitate and go for it. It works an absolute treat and very little negatives.

If building from fresh then I'd position the gantry to run horizontal not vertical like mine does at the minute. I have mine this way to stop the screws getting covered in crap because of how it's built.
I'd build a super strong bedbase with rails running down each side and twin rotating ballscrews under neath the base. It would be very much like this just using ballscrews instead of R&P.

luke11cnc
25-03-2012, 09:28 AM
Jazz would you add a 90 degreed collect/chuck to the spindle so less protrudes out of the z-axis ??

James

JAZZCNC
25-03-2012, 09:41 AM
Jazz would you add a 90 degreed collect/chuck to the spindle so less protrudes out of the z-axis ??

James

Not sure what your meaning James.??? Got a pic.!

georgetheforge
25-03-2012, 10:11 AM
hey jazz that MY photo-!! copyright.... joking obviously-!!

thats an axyz machine- having spoken to the sales guy- he was saying they don't actually sell these in the uk- theres a few in the states but not many-

I asked him about material holding etc and he thought the same as me- although there's a vac table it's not that efficient- and if you were to cut out a circle, for example, as you got to the end there's a danger of it falling back onto the bit- ruining it....

He said obviously you could do mechanical clamping etc but bit more tricky....

i'm pondering a fold down solution, so like the photo but if cutting difficult things/ things that might be hard to clamp, you could lift it down... lots of counterwieghting required and a really stiff table design... hummm

but looking at the photo the z axis is counterwieghted to reduce gravity i guess... nice looking tho...

G

JAZZCNC
25-03-2012, 11:24 AM
I asked him about material holding etc and he thought the same as me- although there's a vac table it's not that efficient- and if you were to cut out a circle, for example, as you got to the end there's a danger of it falling back onto the bit- ruining it....

This is an issue even if the machine is flat. All material needs clamping securely to prevent slippage into cutters path, even the waste to a big degree.
If your using a vacuum system on a vertical machine then obviously it will need designing to account for the extra force required to hold in vertical position. This is obviously where they went wrong because they tried to use a vacuum system designed for flat machine in the vertical position which is obviosly going to be comprimised if not masively over rated for flat bed use.!!

In my experience so far other than the actuall intial clamping it's absolutly no different to working flat with mechanical clamping methods. The intial clamping or holding the material while clamping is ever so slightly more awkward but easily got round by the use of a temporey slidding ledge for material to rest against while first clamp goes on after that it's no different.
With the correct sized vacuum bed it would be a doddle.!!

Surely the folding design defeats the purpose of having it vertical as you will stll need the area to lay flat.? . . . Plus it won't be so easy to do and maintain accurate machine setup.!!