PDA

View Full Version : FOR SALE: CNC Router/Mill



cimbian
27-04-2012, 03:26 PM
Virtually unused Heiz S-720 router/mill with many accessories including vacuum table, vinyl/foil cutter, diamond engraving head, constant engraving pressure head, many cutters/collets.

5868

Includes WinPC-NC USB software and Heiz 5 port controller

Also includes the excellent Vectric Vcarve Pro software.

(License re-assignement has been approved by both vendors, so completely legal software).

Machine was bought for a specific facility but the requirement never transpired, hence it is now for sale.

Total new cost of parts in excess of 4000 plus VAT. Will accept reasonable offer.

PC with software already installed can also be supplied if required.

Genuine sale... I need the space.

PM if interested.

Steve.
Bognor Regis, West Sussex

Chris J
27-04-2012, 03:30 PM
Pm sent Steve

CH1EF
27-04-2012, 06:50 PM
Hi,

I cant seem to private message you, but I am interested so if you wanted to contact me on andypaget1@gmail.com and we can discuss

regards

Lee Roberts
27-04-2012, 07:01 PM
Andy this should now be fixed for you.

.Me

CH1EF
27-04-2012, 07:14 PM
Thank you, I searched for ages to send messages, its all there for me now :)

Chris J
27-04-2012, 07:38 PM
I am going to stand aside on this now, thanks but I have found something else.

Chris

beneboy1
29-04-2012, 02:54 PM
Hi just joined this site
i am having trouble contacting you about this cnc machine

if you receive this can you contact me on lt19@btconnect.com



Virtually unused Heiz S-720 router/mill with many accessories including vacuum table, vinyl/foil cutter, diamond engraving head, constant engraving pressure head, many cutters/collets.

5868

Includes WinPC-NC USB software and Heiz 5 port controller

Also includes the excellent Vectric Vcarve Pro software.

(License re-assignement has been approved by both vendors, so completely legal software).

Machine was bought for a specific facility but the requirement never transpired, hence it is now for sale.

Total new cost of parts in excess of 4000 plus VAT. Will accept reasonable offer.

PC with software already installed can also be supplied if required.

Genuine sale... I need the space.

PM if interested.

Steve.
Bognor Regis, West Sussex

cimbian
02-05-2012, 08:35 PM
Okay, I've now found the time to photograph all the bits and bobs.

Leadhead
03-05-2012, 02:16 PM
Hi - Just down the road at Horndean. Could you give me a ball park price for the package please.
I could pop over on Saturday if you could accomodate.
Regards
Rod

Leadhead
04-05-2012, 02:08 PM
Steve - Thanks for info, but beyond the budget.

Tumpy
07-05-2012, 11:29 AM
Virtually unused Heiz S-720 router/mill with many accessories including vacuum table, vinyl/foil cutter, diamond engraving head, constant engraving pressure head, many cutters/collets.

5868



Steve,

Is this item still for sale?

stevy123
18-06-2012, 11:14 AM
Hi Steve,

Is this machine still for sale?
What price will you take for it? Ive been looking at a new machine but if yours is as good as new i would be interested in it.

Thanks
Steve

cimbian
18-06-2012, 11:33 AM
Yes it is still for sale.

Lumen
18-06-2012, 05:32 PM
Yes it is still for sale.

I am interested in this machine. Can you pm me, or arrange it so I may mail you ?
Thanks
Lumen Dave

stu
25-06-2012, 11:31 AM
Hi Steve,

Can you send a PM or a method to reach you?

I am interested in the CNC you have for sale.

Best regards,


Stuart

cimbian
25-06-2012, 01:43 PM
This machine has now been sold.

Thank you to everyone that expressed an interest.

I do still have the engraving depth controller, diamond drag engraving tool (43mm) and vinyl film cutter (43mm) and am open to offers on these.

Steve.

dunk
29-06-2012, 07:59 PM
This machine has now been sold.

Thank you to everyone that expressed an interest.

I do still have the engraving depth controller, diamond drag engraving tool (43mm) and vinyl film cutter (43mm) and am open to offers on these.

Steve.

hi i am intrested in the bits you have left dunk

dunk
29-06-2012, 09:04 PM
the site wont let me pm you
my contact is duncankemp@ntlworld.com

habibuzziwa
25-09-2012, 02:00 PM
what is the cutting dimension x,y and z

cimbian
25-09-2012, 02:10 PM
what is the cutting dimension x,y and z

The machine has been sold.