PDA

View Full Version : CONVERSION: My Sherline Mill Conversion videos



panofish
05-05-2012, 05:37 AM
Some of you may have seen this already, but just in case you haven't... I thought I'd share my 2 videos of my sherline mill cnc conversion.
I am working hard video document all of my machining projects to share.

Not everything I do is correct, but it is what I know at the time and I want to share so everyone can learn from the good and the bad.
So be kind when reviewing my mistakes and be constructive. :)


http://www.youtube.com/watch?v=e3dEH7SHQiU

rnr107
05-05-2012, 10:36 PM
Hi Panofish,
Thank you for sharing! neat video! your steppers seems a bit big for the mill, no ?
Nice workshop you've got! But if I had that much space, I would have a Bridgy man! Have you got anything bigger? :-)

RNR

panofish
06-05-2012, 08:13 AM
Hi Panofish,
Thank you for sharing! neat video! your steppers seems a bit big for the mill, no ?
Nice workshop you've got! But if I had that much space, I would have a Bridgy man! Have you got anything bigger? :-)

RNR

You can see my harbor freight mill and lathe after 3:15 when I do a fly-through tour of my workshop.
Not much bigger and the lathe was bought used and I need to tear it down and tune it up so she'll run right.


http://www.youtube.com/watch?v=Dp5f0zbmNgc