PDA

View Full Version : RFQ: small cutout panel 66mm x 44mm - stainless steel 1mm thick



dsc
16-06-2012, 01:24 PM
Gents,

I'm currently working on a small machine and need to manufacture the following cutout panel to hold three switches:

http://i1120.photobucket.com/albums/l496/dsc_MT/gaggia%20classic/classic_plate.png

Material: Stainless steel, 1mm thick
Quantity: 1 + 1 (it's two parts, so I need a single pair)

Can anyone provide a quote? It's for a home project so I wouldn't want to spend a fortune. Depending on the costs I might want to produce an aluminium prototype first to see if everything fits properly.

Regards,
Tom

petesurrey
18-06-2012, 09:34 AM
Your drawig is not fullt dimensioned. I would be concerned about the thin strips catching in the machine if these canb be wider then i can machine. Can it be thicker than 1mm? Or can it be ally? If ally is ok i can make out of 1.2 and ship out very quickly.

dsc
18-06-2012, 09:47 AM
Hi,

thanks for the reply, PM sent!

Regards,
dsc.