PDA

View Full Version : diy Engraving head



riche543
20-06-2012, 04:07 AM
Hi all
Just finished building new engraving head .
So z axis will float & has a depth adjustment nose
Works fantastic

http://www.cnczone.com/forums/attachment.php?attachmentid=161719&d=1339914668

http://www.cnczone.com/forums/attachment.php?attachmentid=161720&d=1339914707

http://www.cnczone.com/forums/attachment.php?attachmentid=161721&d=1339914734
Will cut linear rods a bit shorter

http://www.cnczone.com/forums/attachment.php?attachmentid=161722&d=1339914798


I use compressed air too blow chips while cutting so I incorporated it into engraving head too keep nose clean,(small hole left of nose)
http://www.cnczone.com/forums/attachment.php?attachmentid=161723&d=1339914834

http://img.tapatalk.com/dcf54f08-b973-0440.jpg




Very happy with results , no more nice depth one end too deep or miss the other.
http://www.cnczone.com/forums/attachment.php?attachmentid=161724&d=1339914980

Cheers
Riche


Sent from my iPhone using Tapatalk Cheers!


Sent from my iPhone using Tapatalk

motoxy
20-06-2012, 08:00 PM
Welldone riche. Thats been nicely done.

Bruce

riche543
25-06-2012, 02:31 PM
Thanks Bruce




Riche.

Sent from my iPhone using Tapatalk