View Full Version : Ballnut Lubrication / Grease
16-07-2012, 10:49 AM
Good day all.
At somepoint this week I am due to get my new 1605 ballscrews & ballnuts, etc.
Can someone please advice what lubrication / grease to use, and how often to reapply.
Thanks for your time.
16-07-2012, 12:08 PM
Try this thread: Lubrication - OOooeerr-missus (http://www.mycncuk.com/forums/showthread.php/270-Lubrication-%28OOooeerr-missus%29)
18-07-2012, 06:29 PM
I just put a bit of oil in every so often...it tends to flush out any debris from the ballnut. Unless you're running at a particularly high speed I doubt it makes too much difference what you use.
18-07-2012, 08:08 PM
Pretty much same has Jonathan just use light Way-oil same that I use on lathe pumped thru nut grease point and do it every other week.!! . . Not too much just enough to leave a very light film on screw after nut has passed over.
Powered by vBulletin® Version 4.2.3 Copyright © 2016 vBulletin Solutions, Inc. All rights reserved.