PDA

View Full Version : Denford CNC MicroRouter



mekanik
27-08-2012, 04:07 PM
Greetings all
A Denford Micro Router is showing on ebay and as it is a short drive from my location i was thinking of having a bid, has anyone got anything good or bad to say about this machine
Denford CNC MicroRouter | eBay (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=221115503135&ssPageName=ADME:X:RTQ:GB:1123)
Regards
Mekanik

Jonathan
27-08-2012, 04:26 PM
Had one very similar to that at school. It's fine for cutting woods and plastics, but if you need to cut aluminium then you want something stronger. It's certainly worth the £150 starting bid.

JAZZCNC
27-08-2012, 04:37 PM
Ha ha that wasn't clever posting the Ebay link John S or i2i will be in there like a shot.!!

i2i
27-08-2012, 05:00 PM
Ha ha that wasn't clever posting the Ebay link John S or i2i will be in there like a shot.!!Haha, already saw it earlier. If you don't win that one i have one with a vac table and extraction unit.

JAZZCNC
27-08-2012, 05:05 PM
Haha, already saw it earlier. If you don't win that one i have one with a vac table and extraction unit.

Eh eh but What he's not telling you is it will have an extra zero on the end. . .Lol

Jonathan
27-08-2012, 05:18 PM
Eh eh but What he's not telling you is it will have an extra zero on the end. . .Lol

Better than the extra two zero's if you buy it from Denford!

irving2008
27-08-2012, 05:24 PM
Another one here (http://www.ebay.co.uk/itm/Denford-CNC-microrouter-compact-/200809551525?pt=LH_DefaultDomain_3&hash=item2ec12e96a5), but £900 starting price !

i2i
27-08-2012, 05:34 PM
they normally go for around £1000

John S
27-08-2012, 05:54 PM
Which is about £850 more than they are worth.

JAZZCNC
27-08-2012, 05:59 PM
Which is about £850 more than they are worth.

And thats if price of scrap is up hey John. . . :hysterical:

i2i
27-08-2012, 06:17 PM
if you compare them to what's about new, they compare quite well and are probably still a better buy.

mekanik
27-08-2012, 06:40 PM
Thanks Guys
GBP 1000 is a little steep for a dabble into the wonderfull world of CNC, comments apprecited
Mekanik

JAZZCNC
27-08-2012, 06:57 PM
Thanks Guys
GBP 1000 is a little steep for a dabble into the wonderfull world of CNC, comments apprecited
Mekanik

Can't do it properly or with much justice for much less.!!