PDA

View Full Version : RFQ: simple plates for a z axis assembly - 15mm Ecocast Alu



dsc
10-10-2012, 02:33 PM
Gents,

I'm trying to build an L shaped box which has a z axis assembly mounted on it. Looking for someone who can CNC the following in MDF, plywood or alu (it's a prototype to try out an idea, so I'm trying to keep the costs down):

http://i1120.photobucket.com/albums/l496/dsc_MT/random/mdf_cutout.png

The plates will need holes for screws / bolts and a few larger holes for bearings. MDF / plywood would need to be 15mm, alu would be 10mm thick.

The above drawing is a rough estimate of how many plates are needed and the dimensions, I can of course provide more precise drawings for the job.

Regards,
dsc.

D-man
22-10-2012, 06:36 PM
Did you manage to get these cut?

dsc
22-10-2012, 06:42 PM
Hi D-man,

nope, no offers yet. Would you be interested?

Regards,
dsc.

D-man
22-10-2012, 07:21 PM
Yeah I could be interested. However I don't get back until wed. If you like I can drop you a line then. In the meantime drop me a more accurate file over.

D-man
22-10-2012, 07:22 PM
All in mdf ok for you?

dsc
22-10-2012, 09:43 PM
Yup, all MDF is the plan. PM sent.

Regards,
dsc.

dsc
25-10-2012, 05:14 PM
Just a quick update of the overall view, going with 18mm MDF and cross dowels for assembly:

http://i1120.photobucket.com/albums/l496/dsc_MT/random/blow_out.jpg

Regards,
dsc.

dsc
04-01-2013, 04:31 PM
Gents,

this now needs cutting in 15mm Ecocast Alu:

7858

Any good souls willing to cutting this please PM. Material is Ecocast 15mm, which will probably needs supplying as I haven't got the means to transport 500mm x 1500mm 15mm thick plate.

Regards,
dsc.