View Full Version : 3d Milling using Siolidworks and SolidCam ***Guide***

22-10-2012, 06:53 PM
I've written a little guide for anyone wanting to get into 3d milling using solidworks.

I hope it helps some people and I would appreciate feedback and if this thread could be stickied.

use my guide at your own risk! double check the tool paths in mach!!!!!


I advise downloading this and not viewing it in Google docs!!

links to post processor


23-10-2012, 12:31 AM
Wow, I just read your manual and without testing it, it will already solve some problems I have . Great job indead !!!
Thanks a lot