PDA

View Full Version : NEW MEMBER: Greetings from the Oldham area



Len-Tikular
16-11-2012, 11:04 PM
Anyone in the Oldham area operating home built CNC equipment I would be happy to hear from you.
I have a flat bed router 1.2 Mtrs by 600mm running under Mach3, using All Vectric software packages, Aspire, Vcarve Pro, Photocarve etc.


Currently I have completed my 4th Axis and have it attached to my router but want to use it with my bench mill so I need to build the handheld controller. Got all the bits but need a PCB. Can anyone help.?

Regards to all.

George7403

martin54
16-11-2012, 11:46 PM
welcome to the forum George, there seem to be people with machines all over the place so I would be surprised if there wasn't anyone in your area.

blackburn mark
17-11-2012, 05:30 PM
Currently I have completed my 4th Axis and have it attached to my router but want to use it with my bench mill so I need to build the handheld controller. Got all the bits but need a PCB. Can anyone help.


http://www.mycncuk.com/forums/diy-project-building/150-cnc-rotary-table-lathe-head-indexing.html

this might do the trick if your a dab-hand with a soldering iron :)