View Full Version : NEW MEMBER: Hello all
03-12-2012, 04:07 AM
I am new to CNC machining as in... I still have not made my mind up about the chinese 3040 / or 6040. I do design and prototyping with CAD and a 3d printer (bfb3000). So I am stepping up to a CNC machine for making molds from epoxy board. That is pretty much it.
Any help would be appreciated
See u all you l8rs
03-12-2012, 01:17 PM
Welcome to the forum
03-12-2012, 04:37 PM
Thanks martin looks like a great place for CNC makers and designers.
If you know of anyone with experience building their own CNC machine please point me in the right direction. I have 1300 quid to spend and so far have seen thousands of videos on DIY machines. Seems many have different hardware/ software setups. The only thing I think is missing is how reliable these machines are :0)
Anyway see you around!
03-12-2012, 05:08 PM
yep, have a dig through the build logs and a read of some of the threads and you'll soon get infected with the CNC virus! :-)
Most of the people on here have built or are building or are planning to build one or in several cases more than one! :-)
03-12-2012, 05:44 PM
Be careful what you watch when it comes to DIY machines, some are built purely on the cheapest budget that is humanly possible so although they may do a job you could be sacrificing elements you desire like accuracy to save money. Sounds like you have a reasonable budget for the size machine your looking at. I replied to your questions about building & links on the other thread you started, probably best to keep this one just for saying hello.
Powered by vBulletin® Version 4.2.3 Copyright © 2016 vBulletin Solutions, Inc. All rights reserved.