PDA

View Full Version : Quick Advice Needed - F&S



Tenson
01-01-2013, 04:49 PM
Can anyone suggest a suitable F&S for a 20deg V-bit with a 0.2mm tip?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140425469336&ssPageName=ADME:L:OC:GB:3160

I will be cutting Walnut to make a photo using VCarve. Maximum depth is 2.5mm.

Thanks very much!

Tenson
01-01-2013, 05:38 PM
I just had a quick play and found it doesn't make a huge difference as long as it doesn't burn the wood nor break the bit.

I'm going to try 1,000mm/min and 22,000RPM