View Full Version : T and L profile Joining plates

02-01-2013, 07:05 PM
Who sells profile "T" and "L" joining plates to brace 45x45 profiles together ? looking for 4mm thickness and around 100mmX100mm

like these ;


02-01-2013, 07:23 PM
No idea where you can get them, but I made a fair few for luke11cnc here on this forum. If you're not to fussed about how it looks you could get some 4mm aluminum sheet and make some yourself, since they don't need to be particularly accurate.


I've unfortunately not got time to make you some, unless you can wait about a month!

02-01-2013, 07:58 PM
Ok.ta.... I will probably make some later then. It just would have been easier to buy some "off the shelf" if they were about.