Very simple small part

[Shinobiwan]

Hi guys,

Need two of these. Nothing fancy just a small rectangle milled down to 13.5mm thickness and then a couple of holes.

Would do this myself on the mitre saw and drill press but the tricky part is getting the 13.5mm thickness. Figure its easier just to pay someone else to do it!

Have the dxf.

[John S]

You have missed the hole centres out

[Shinobiwan]

Opps. That's what you get posting first thing in the morning whilst still half asleep.

Try again...

[John S]

Can do you a couple but won't be until Monday as I'm away until then on yet another Ebay round run [ or is that run around ? ]
This any good ?
What material, alloy or steel ?

[Shinobiwan]

That's more than fine with me, thanks John. Aluminium is fine for this or whatever you have lying around. Doesn't have to be perfect either, its only a spacer so its just the depth of 13.5mm that has to be accurate.

I'm up in Notts most weekends so could come collect. Long Eaton isn't far from Bulwell.

[Shinobiwan]

That's more than fine with me, thanks John. Aluminium is fine for this or whatever you have lying around. Doesn't have to be perfect either, its only a spacer so its just the depth of 13.5mm that has to be accurate.

I'm up in Notts most weekends so could come collect. Long Eaton isn't far from Bulwell.

Ps. What you bought now or is that sold?