PDA

View Full Version : NEW MEMBER: not new to cnc



ciscoeuk
27-01-2013, 01:43 PM
hi all just wanted to say hello and is there anyone in Nottinghamshire/Lincoln area on the forum whois is using or building a cnc router at present
if so i can make contact please

i am in the process of build a 8x4 cnc, build log to be put together soon

please get in touch

GEOFFREY
28-01-2013, 11:47 AM
Welcome to the site. I Live in Bourne, have a small machine (540x450) and am looking into re-building a slightly larger machine (may decide to go down800x800), but, may go down the new-build route instead. will pm with my details. G.

Jonathan
29-01-2013, 11:36 AM
I'm at Nottingham Mon-Fri, so feel free to send me a message / use skype if you need anything.

ciscoeuk
29-01-2013, 11:58 AM
I'm at Nottingham Mon-Fri, so feel free to send me a message / use skype if you need anything.

due to be nottingham next week

do you work or live there? or can i just come along and say hello

Jonathan
29-01-2013, 12:04 PM
do you work or live there? or can i just come along and say hello

I'm at the University of Nottingham...my workshop is at home near Loughborough.

ciscoeuk
29-01-2013, 07:31 PM
cool you study or do you lecture in engineering?

martin54
29-01-2013, 07:38 PM
Welcome to the forum, lots of useful advice on the site & some very knowledgeable people.

ciscoeuk
29-01-2013, 07:56 PM
thanks

have a look at my build log

Jonathan
30-01-2013, 01:37 PM
cool you study or do you lecture in engineering?

Study - Electrical Engineering to be precise.

ciscoeuk
30-01-2013, 02:39 PM
Study - Electrical Engineering to be precise.

nice noe i know who call upon to help with the wiring LOL