x4pcs 18mm Marine Ply Disc's - Ruff & Ready @ 390mm OD

[Lee Roberts]

Hi guys,

I need 4 ply disks cut please, below is the pic of the unit they will become part of. Plan is to paint it white, add the disks to act as shelves, stain and seal - Job done. As you can see i've built a "lean to" down the side of my house so it will be out of the rain but would like marine ply if possible but i guess something like far eastern would do.

Will then pop some garden ornaments on them with some small plants/pots for decoration, picked it up of the local scrap man as he was about to "way it in" £5, think it would look nice once dressed up :tickled_pink: :wink:.

Finish dosnt matter to much as i can sand them down and so on, just after the circles/disks really, i can arrange postage via citylink for around £10 if you would prefer that. If you have the facility to put a "round over" on one of the outside edges that would be appreciated but not a must.

Poped a drawing in for you to work from as well :)

Quote me happy guys.

.Me

[Lee Roberts]

Just realised this is the first time i have used the RFQ section !

.Me

[Web Goblin]

Would it not be better from maybe white or natural nylon or plastic? It would survive outside forever then.

[GEOFFREY]

Lee, if the indents are semi-circular shouldn't the dimension be 12.5mm? G.

[Lee Roberts]

Would it not be better from maybe white or natural nylon or plastic? It would survive outside forever then.

Well yea i guess a plastic would be better, i'm also thinking now 18mm thickness would be ott as well so 10mm would be more than fine, i dont plan on anything heavy going on them. When i get my second machine up and running i could always remake them but if people want to quote for plastics thats fine :)


Lee, if the indents are semi-circular shouldn't the dimension be 12.5mm? G.

Ops, sorry the drawing was just a quick hash after dinner. Yea they need to be 25mm deep and 50mm wide would probably look more elegant, a small radius on the arc end points would be nice to.

.Me

[Lee Roberts]

This has now been arranged and fulfilled thanks Geoffrey, will post back pics of the finished job once done :applause:

.Me

[Lee Roberts]

Today I received the disks, below are the pics of them on the primed frame, just need to stain and seal now and get a topcoat on the frame!

Big thank you to everyone who offered to make them for me, it’s nice to know there is people willing to help others.

If there is ever anything I can do for you guys just let me know and I will do my best.

Will post the finished pics at the end :beer:

.Me

[Philly]

Looks good, but its march now, take down your xmas lights :tongue:

[Jonathan]

Now you just need to finish your router...it's been a while since we heard anything about it!

[WandrinAndy]

Now you just need to finish your router...it's been a while since we heard anything about it!

Are you refering to Lee or Geoffrey?

Like the simple uncluttered look of the steel:wood thingy btw!

[Jonathan]

Are you refering to Lee or Geoffrey?

Leeeeeeeee

[Lee Roberts]

Looks good, but its march now, take down your xmas lights :tongue:

Guilty Sir!, only took the ones on front of house down a week ago. Couldnt do it with the snow and so on :tongue:, we are leaving the stars up tho as they are nice when entertaining of an evening, we dont have smoking in the house so people tend to congregate at the back down, another reason for the "lean to" being born - that and the need for me to work with a chop saw this spring...more on that later!


Now you just need to finish your router...it's been a while since we heard anything about it!

Hehe, like i dont know that!, before i can build it i need a place for it to live - enter the 24x10ft workshop build'ing log coming late spring time!

.Me

[sportage]

Morning Lee,
Look really good. Would you be able to advise where you got these cut in Ply. Looking for some ply cutting myself.
Thanks


Hi guys,

I need 4 ply disks cut please, below is the pic of the unit they will become part of. Plan is to paint it white, add the disks to act as shelves, stain and seal - Job done. As you can see i've built a "lean to" down the side of my house so it will be out of the rain but would like marine ply if possible but i guess something like far eastern would do.

Will then pop some garden ornaments on them with some small plants/pots for decoration, picked it up of the local scrap man as he was about to "way it in" £5, think it would look nice once dressed up :tickled_pink: :wink:.

Finish dosnt matter to much as i can sand them down and so on, just after the circles/disks really, i can arrange postage via citylink for around £10 if you would prefer that. If you have the facility to put a "round over" on one of the outside edges that would be appreciated but not a must.

Poped a drawing in for you to work from as well :)

Quote me happy guys.

.Me

[Lee Roberts]

Morning Lee,
Look really good. Would you be able to advise where you got these cut in Ply. Looking for some ply cutting myself.
Thanks

Hi,

I got them from placing an ad in the Projects, Jobs & Requests (http://www.mycncuk.com/forums/projects-jobs-requests/) forum :)

There are lots of members here who will be willing to freelance for you, just post your request and watch the magic as offers come in :).

.Me

[Lee Roberts]

Just a quick update on this...

Managed to get some stain on the disks and the frame primed, went for some georgian medium oak stain and have a small drum of johnstones hard wearing wood floor sealer ready to go next.