PDA

View Full Version : WANTED: Need a tiny bit of work done on lathe



Tenson
27-02-2013, 03:15 PM
Would somebody be able to trim the outside diameter of a collet sleeve down from 6.35mm (1/2") to 6mm for me? I'd like to be able to use 3.17mm bits in my 6mm chuck. However I can only find reducer sleeves that go from 6.35mm to 3.17mm.

Please let me know how much you'd want for the work.

Alternatively if you know where I can buy such a collet sleeve please speak up!

cropwell
27-02-2013, 06:44 PM
Reduzierspannzange -CNC-Plus Germany (http://www.cnc-plus.de/Spindles---Accessories/Collets/Reduce---Adaptor-Collet.html)

€12 plus tax and postage

OK ?

GEOFFREY
27-02-2013, 07:40 PM
Read your PM's. G.

Web Goblin
27-02-2013, 07:47 PM
What machine are they for?

Tenson
28-02-2013, 12:22 AM
For my mill. Geoff said he has a reducer sleeve and a friend who could turn it down for me, so I'll wait and see if he will do it. Thanks!