PDA

View Full Version : WANTED: 1/8" or 3mm Single flute carbide cutters



craigrobbo
07-04-2013, 09:30 PM
Hey guys.

I am looking for some cutters, I have searched eBay for the last hour and can only find them in China.

Normally that would not be a problem, However my job needs to be finished by the weeks end.

I could do with buying a batch of 5 or better yet 10 (preferably new)

If any one has some paypal cash waiting.

Thanks

Craig

Bazzer
07-04-2013, 09:55 PM
Think I have a couple you can have if you replace when you next order.
Let me know if required

Jonathan
08-04-2013, 12:12 AM
What flute length do you need?

craigrobbo
08-04-2013, 10:48 AM
What flute length do you need?

The material I am cutting is 10mm thick so flute length of 10mm or more - Anything longer than 10mm is a bonus really.

Thank you

ptjw7uk
08-04-2013, 08:50 PM
Toolstation has some 1/8 with 1.4 shaft Toolstation > Power Tool Accessories > Router Bits > Router Bit Straight Imperial (http://www.toolstation.com/shop/Power+Tool+Accessories/Router+Bits/Router+Bit+Straight+Imperial+14+18+x+12/d80/sd2579/p46293)
Peter

uppy121
09-04-2013, 12:29 AM
thank you ptjw7uk just put a order in for 10 thanks uppy121

Jonathan
09-04-2013, 10:17 AM
thank you ptjw7uk just put a order in for 10 thanks uppy121

There should be one of their shops near you?

Dow, missed that one... I've got a few of those you could have had as since I started using single flute cutters I've not touched the standard router cutters. You need to be careful with the ones from toolstation. They can work well, but they do break easily if you get the feedrate wrong.

ptjw7uk
09-04-2013, 06:49 PM
The toolstation ones are not that good but they cheap enough to learn on!

Peter