PDA

View Full Version : Morse taper drills



John S
08-05-2013, 12:37 AM
I have about 150 kg of Morse taper drills to dispose of.
A few MT1, and the rest MT2 up to MT5 all good quality and many just been professionally resharpened.
Quite a few long series.

Looking at 2 per drill regardless of size. These will have to be collected from Notts Derby border M1 J24 / 25 area, Long Eaton post code NG10

Don't ask me to sort any out, not going to happen and no I don't have lists of sizes.
Definitely not packing and posting for two quid each unless anyone is prepared to pay 35 an hour for me to go to the post office.

I'm going to the Harrogate show on Friday, will put a load in the van and will be in the main car park opposite the main admission doors 3:00pm onwards. look for a bright blue Fiat Ducato van with Stevenson Engineers on the side.

What hasn't gone by end of the month is getting weighed in

Jonathan
08-05-2013, 12:45 AM
I'm interested. If you're happy to sell me some then what time will you be around tomorrow/Thursday?

Edit: I'd come by bike, so however many I can fit in my rucksack.

John S
08-05-2013, 12:54 AM
All day tomorrow, until 4:00 pm Thursday
No 55-61. NG10 1FR
07966 376085 bell me with a time so i can be sure of being in, got to fit a couple of short local trips in.

i2i
08-05-2013, 01:18 AM
I'm up that way on Thursday, if there's any left.

Jonathan
08-05-2013, 01:22 AM
I'm up that way on Thursday, if there's any left.

I don't think I can get 150kg on my bike, I'm not this guy:

8889

:wink:

John S
08-05-2013, 01:27 AM
I'm up that way on Thursday, if there's any left.


Bound to be. Is the number and post code enough ?

i2i
08-05-2013, 01:32 AM
yes that'll be good. I'm going up past you in the morning and back past early afternoon. Afternoon should work well as Jonathan can have a look first.

cropwell
08-05-2013, 08:00 PM
I don't think I can get 150kg on my bike, I'm not this guy:

8889

:wink:

I can get 150kg on my bike without the bricks (That's just me !)