PDA

View Full Version : Morse taper drills



John S
07-05-2013, 11:37 PM
I have about 150 kg of Morse taper drills to dispose of.
A few MT1, and the rest MT2 up to MT5 all good quality and many just been professionally resharpened.
Quite a few long series.

Looking at £2 per drill regardless of size. These will have to be collected from Notts Derby border M1 J24 / 25 area, Long Eaton post code NG10

Don't ask me to sort any out, not going to happen and no I don't have lists of sizes.
Definitely not packing and posting for two quid each unless anyone is prepared to pay £35 an hour for me to go to the post office.

I'm going to the Harrogate show on Friday, will put a load in the van and will be in the main car park opposite the main admission doors 3:00pm onwards. look for a bright blue Fiat Ducato van with Stevenson Engineers on the side.

What hasn't gone by end of the month is getting weighed in

Jonathan
07-05-2013, 11:45 PM
I'm interested. If you're happy to sell me some then what time will you be around tomorrow/Thursday?

Edit: I'd come by bike, so however many I can fit in my rucksack.

John S
07-05-2013, 11:54 PM
All day tomorrow, until 4:00 pm Thursday
No 55-61. NG10 1FR
07966 376085 bell me with a time so i can be sure of being in, got to fit a couple of short local trips in.

i2i
08-05-2013, 12:18 AM
I'm up that way on Thursday, if there's any left.

Jonathan
08-05-2013, 12:22 AM
I'm up that way on Thursday, if there's any left.

I don't think I can get 150kg on my bike, I'm not this guy:

8889

:wink:

John S
08-05-2013, 12:27 AM
I'm up that way on Thursday, if there's any left.


Bound to be. Is the number and post code enough ?

i2i
08-05-2013, 12:32 AM
yes that'll be good. I'm going up past you in the morning and back past early afternoon. Afternoon should work well as Jonathan can have a look first.

cropwell
08-05-2013, 07:00 PM
I don't think I can get 150kg on my bike, I'm not this guy:

8889

:wink:

I can get 150kg on my bike without the bricks (That's just me !)