PDA

View Full Version : WANTED: Off-cut required.



Wal
10-05-2013, 02:32 PM
Hello,

I'm in need of a small piece of aluminium plate (either 15mm or 20mm thick) and about 10cmx5cm.

Anyone fancy donating a piece? I'll pay the postage, of course.

Give us a shout if you can help.

Thanks!

WandrinAndy
10-05-2013, 07:03 PM
If you don't have joy here, it's nice to know that Forward Metals on eBay sell aluminium in dimensions that one would normally only find as off-cuts, such as:

Aluminium Flat Bar - 2" x 3/4" x 250mm Long | eBay (http://www.ebay.co.uk/itm/Aluminium-Flat-Bar-2-x-3-4-x-250mm-Long-/160313507705)

Cheers,
Andy

Kn8
11-05-2013, 06:39 AM
Hi Wal

I have sent you a private message.

Kn8

Wal
11-05-2013, 09:06 AM
Thanks for that link Andy - very helpful!

Wal.

Jonathan
11-05-2013, 10:35 AM
Have you got what you need? If not then I've got plenty of 4"x5/8" flat bar. Is that any use to you?

Wal
13-05-2013, 12:23 AM
Hi Jonathan,

Yeah, I think that Ivan's got what I'm after - I'll give you a shout should I need any more!

Cheers!

Wal.

Chaz
14-12-2015, 10:43 PM
Have you got what you need? If not then I've got plenty of 4"x5/8" flat bar. Is that any use to you?

Sorry to hijack, I am looking for some 4inch square (or similar) Alu, around 100-150mm long. What do you have that I can buy?

Thanks

Clive S
14-12-2015, 11:07 PM
Sorry to hijack, I am looking for some 4inch square (or similar) Alu, around 100-150mm long. What do you have that I can buy?

ThanksChaz you do realise that this post is over two years old. You can buy ali from http://www.aluminiumwarehouse.co.uk/

Chaz
14-12-2015, 11:09 PM
Chaz you do realise that this post is over two years old. You can buy ali frohttp://www.aluminiumwarehouse.co.uk/
Crap, lol. Nvm then, thanks.