PDA

View Full Version : PCB Track Width Calculator



irving2008
10-05-2013, 02:34 PM
Hi MC , nah the last on the rail powers two 5v servos the first powers a raspberry pi , i'll have to rethink if it drains or spikes to much, but they are 7 quid a pop I would expect then to have some umthh ! lol
Beer 5 ..now poured !

Use this: The PCB Track Width Calculator (http://www.pcbco.com.au/tracecalc.html) to calculate track width...

Incidentally, 3-pin regulators should have 10 - 100nF ceramic capacitors on input and output else things can get noisy. See their datasheets.